logo

CONCRETE Products

  1. >> home
  2. products
  3. BUILDWELL COARSE PUTTY

PRODUCT CATEGORIES



BUILDWELL COARSE PUTTY

Size:

30Kg

Coverage:

MIXING RATIO(Take 250-300ml of clean water for 1 Kg of Buildwell Coarse Putty)


VIEW DATASHEET

BuildWell Coarse Putty is white cement based wall putty. It contains finest quality minerals, white cement and polymers and is more durable and has better adhesion strength compared to other conventional products like Gypsum and P.O.P.

Usage:
Specially developed to be used on concrete/mortar surface wall (Internal) and ceiling to cover unevenness and pinholes on plastered surface and make the wall/ceiling white, smooth and levelled.

  • Dampen the plastered wall surface with potable water. (Allow excess water to drain off completely).
  • Apply the above mix with the help of a steel trowel or putty blade starting from bottom to upwards, followed by right to left direction to a thickness of about 3-4 mm and let it dry for at least 3 hours.
  • If required more coats to cover unevenness, than it should be applied in multiple coat and each coat should not exceed less than 4mm.
    • For better results, it is always recommended to let the surface wall dry overnight for at least 10-12 hours. (Better adhesion to the base plaster).
  • Once the finish coat is fully dried and set, apply two coats of BuildWell Wall Putty for better whiteness and smocth surface for primer and paint application.
  • If required to remove any unevenness before any primer or paint application, level the surface with very fine emery paper not less than 300 no.

  • Clean loose particles, dirt, grease and traces of adhering material from the wall surface with the help of sand paper, putty blade or by wire brush.
  • For loose plastered areas, remove the defective material and re-plaster the area with BuildWell Ready-Mix Plaster.
  • For ceiling/wall, which is not even, re-plaster it with BuildWell Ready-Mix Plaster to make them even.
  • If any cracks in base plaster, fill it by using HomeSure Crack Filler.
  • Moisten the surface with sufficient quantity of clean water.

RECOMMENDED PRODUCTS


3100 SET - 2K MS CLEARCOAT + HARDENER + THINNER

Kapci 3100 is a 2K medium solid clear coat especially formulated for applying over Kapci ...

Learn More


MATT EMULSION

Copolymer acrylic paint, having good opacity and coverage which conforms to quality standa ...

Learn More


CHLORINATED FLOOR DRESSING PAINT

Chlorinated floor dressing paint is based on copolymer of vinyl chloride. Use as protectiv ...

Learn More


3100 - 2K MS CLEARCOAT

Kapci 3100 is a 2K medium solids acrylic clearcoat especially formulated for applying over ...

Learn More

 
Privacy Policy | Credit Facilities

© Polytol Paints Ltd 2020. All rights reserved.

  • facebook  instagram  youtube  linkedin