WOOD Products

Tools:
Filling knife.

Work filler in to crack or hole.
Smooth off with filling knife.
For repairs deeper than 25 mm - build up in layers allowing too dry between applications.
For a smooth finish sand (100 grit paper) before applying finish.
Allow 24 hrs before machining (Drilling, Mechanically Sanding…).

• Surfaces must be clean, dry and free of dirt, grease, grime, all loose material and other contamination.
• Remove all loose and old finishes from around the area to be repaired.
• Thoroughly abrade the surface using a coarse abrasive paper.
• Wipe surface clean with Acetone, Ethyl Acetate, Methylated Spirits (De-natured Alcohol) or similar to remove any abrasion residue. DO NOT use White Spirit.