METAL Products

Tools:
Spray.
Cloth.
Brush.
Sponge.

1 – Apply RUST SPIRIT by spray or using one of the “Application” tools. Rust formation will start quickly. If rust does not occur on ferrous metals there is a protective film on the surface and this should be removed before re-applying RUST SPIRIT.
2 – Repeat application of RUST SPIRIT at regular intervals (15-30 minutes) until the desired effect and colour has been achieved.
3 – Once the desired decorative effect has been achieved the rusting process should be stopped and protected

• Surfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.
• Meticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.