WOOD Products

Tools:
Brush.
Roller.
Spray: Airless Sprayer, Garden Sprayer.

Apply 2 even applications of TEAK-OLJE wet on wet.
Apply 1st application of TEAK-OLJE and allow to penetrate, normally 15-20 minutes.
Apply 2nd application and allow to penetrate.

• Surfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings.
• Treat mildew with a 50/50 bleach/water solution. Scrub solution on to surface and allow to stand for 10-15 minutes, rinse thoroughly.
• After stripping and cleaning, allow wood to dry 2-3 good drying days or until it has reached a moisture content of 18 % or less before applying finish.
• TEAK-OLJE may only be applied to bare wood surfaces or weathered wood surfaces previously finished with TEAK-OLJE. ALL other finishes must be completely and thoroughly removed.
• If necessary sand surface after cleaning and/or stripping (100 grit paper).