WOOD Products

Tools:
Spatula or filling knife and bucket.
Use stainless steel tools including bucket to avoid changing the shade of the wood.

Apply mixture with spatula or filling knife working well in to joints, cracks etc.
Allow to dry.
If filler has shrunk or sunk (concave) repeat the process to build up the filler to the level of the floor. Do not sand between applications.
When dry continue sanding process from the last grit used (No 80 or 100). Meticulously vacuum all surfaces after each sanding.
Apply desired Owa trol floor finish.

• Surfaces must be dry, clean, free of dirt, grease and other surface contamination including previous coatings.
• LIANFLOOR® can only be applied to bare wood surfaces. ALL other finishes MUST be completely and thoroughly removed.
• Always clean meticulously with a vacuum cleaner after each sanding, including any dust traps (skirting, radiators, pipes, window sills, etc).
• Sand wooden floor using appropriate system and abrasive grades up to grit No 80 or 100 depending on condition of surface and wood species. Use an edge sander for edges, a mechanical hand sander, chisel or scraper for corners.
• Apply LIANFLOOR® as per “Mixing and Application” instructions below.
• Finish with finishing grade up to grit No. 120 or 150 depending on the wood species and thickness of wear layer.