WOOD Products

Tools:Brush, Roller, Spray
Stir product well (2 to 3 minutes) before and during application. Do not thin.
Apply a 1st liberal, even application in the direction of the grain.
Allow to dry a minimum 6 hours (20°C at 65 % RH).
Apply a 2nd even application in the direction of the grain.

• Surfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings.
• Treat mildew with a 50/50 bleach/water solution. Scrub solution on to surface and allow to stand for 10-15 minutes; rinse thoroughly.
• After cleaning and/or stripping, allow wood to dry 2-3 good drying days or until it has reached a moisture content of 18 % or less before applying finish.
• ANTIGLISS can only be applied to bare wood surfaces or weathered surfaces previously finished with ANTIGLISS. ALL other finishes MUST be completely and thoroughly removed.
• If necessary sand surface after cleaning and/or stripping (80 grit paper).